Click and drag for 360° view
DS7 Tech specs
Push ballpoint pen in two matt, seven full-colour polished, eleven frosted and eleven transparent colours. Special casing colours according to PMS from 10,000 units. Push button can be contrasted with colour and surface. Optionally with chrome or satin finish nose cone. Four printing surfaces, clip printable in up to six colours. Standard version with high-quality Floating Ball 1.0® refill, optionally with Floating Ball® 1.4, Gel SuperDry® or Gel Asia refill. All Prodir writing instruments are refillable.
Surface
Button
Metal nose cone
Refills
Floating Ball®
High-quality jumbo plastic ballpoint pen refill with a 1.0 mm tungsten carbide writing ball in a nickel silver tip. Medium viscosity ink paste for a comfortably-smooth writing feeling. In compliance with ISO 12757-1/2, waterproof. Also available as a metal refill with a larger ink tank and longer writing performance.
Floating Ball® lead free
Unique jumbo plastic ballpoint pen refill with a 1.0 mm or 1.4 mm tungsten carbide writing ball in a tip made of lead-free, rust-proof steel. Medium viscosity ink paste for a comfortably-smooth writing feeling. In compliance with ISO 12757-1/2, waterproof. The refill is compliant with REACH 1907/2006 regulation and contains no elements on the SVHC list (Substances of Very High Concern) and its annexes. Exclusively for DS Regeneration Pens.
Gel
Gel Asia
Plastic refill with extra-fine 0.5 mm tungsten carbide writing ball in corrosion-resistant stainless steel tip, filled with water-based pigmented ink. The fine writing line is particularly suited for Asian writing habits. Writing colours blue and black. In compliance with ISO standard 27668-1/2, waterproof. Remove red protective cap from the tip before using.
SuperDry® Gel
Plastic jumbo gel writer refill for flowing, soft gel-writing feeling. Distinctly faster drying than conventional gel refills. Top-quality stainless steel tip with 0.7 mm tungsten carbide writing ball. Writing colours blue and black. In line with the ISO 27668-1 standard. Remove red cap from the tip before using.
Print areas
A
Side cap
30 × 5 mm (1,18” × 0,20”)
1 colour
B
Clip
45 × 8 mm (1,77” × 0,31”)
6 colours
C
Back cap
30 × 7 mm (1,18” × 0,28”)
1 colour
D
Body
30 × 33 mm (1,18” × 1,30”)
4 colours
