Home / Pens / Ds3 biotic / Tech specs

Click and drag for 360° view

DS3 Biotic Tech specs

Twist ballpoint pen with casing and mechanism made from renewable and biodegradable raw materials in line with EN 13432. In terms of the overall balance (including refill and spring), this equals a compostability factor of 75%. Seven select standard colours in natural shades. Special colours based on PMS already from 10,000 units. In the „Sand“ version, the bioplastic (PLA) is mixed with wood-plastic composites (FSC). A total of three printing surfaces, clip printable in up to six colours. Standard version with high-quality Floating Ball 1.0® refill, optionally with Floating Ball® 1.4, Gel SuperDry® or Gel Asia refill. All Prodir writing instruments are refillable.

Surface

B
Biotic
B
02
04
10
21
40
52
75

Refills

Floating Ball®

High-quality jumbo plastic ballpoint pen refill with a 1.0 mm tungsten carbide writing ball in a nickel silver tip. Medium viscosity ink paste for a comfortably-smooth writing feeling. In compliance with ISO 12757-1/2, waterproof. Also available as a metal refill with a larger ink tank and longer writing performance.

blue
black

 

Floating Ball® lead free

Unique jumbo plastic ballpoint pen refill with a 1.0 mm or 1.4 mm tungsten carbide writing ball in a tip made of lead-free, rust-proof steel. Medium viscosity ink paste for a comfortably-smooth writing feeling. In compliance with ISO 12757-1/2, waterproof. The refill is compliant with REACH 1907/2006 regulation and contains no elements on the SVHC list (Substances of Very High Concern) and its annexes. Exclusively for DS Regeneration Pens.

blue
black

 

Gel

Gel Asia
Plastic refill with extra-fine 0.5 mm tungsten carbide writing ball in corrosion-resistant stainless steel tip, filled with water-based pigmented ink. The fine writing line is particularly suited for Asian writing habits. Writing colours blue and black. In compliance with ISO standard 27668-1/2, waterproof. Remove red protective cap from the tip before using.

SuperDry® Gel
Plastic jumbo gel writer refill for flowing, soft gel-writing feeling. Distinctly faster drying than conventional gel refills. Top-quality stainless steel tip with 0.7 mm tungsten carbide writing ball. Writing colours blue and black. In line with the ISO 27668-1 standard. Remove red cap from the tip before using. 

blue
black

Print areas

B
Clip
40 × 8 mm (1,57” × 0,31”)
6 colours

C
Back cap
25 × 4 mm (0,98” × 0,16”)
1 colour

D
Body
50 × 25 mm (1,97” × 0,98”)
4 colours

Print areas